Recognize the signs of Car Wiper Trouble

Recognize the signs of Car Wiper Trouble

Starting from rubber wipers to switch.

The existence of the wiper of the car certainly is very vital, especially during heavy rain. To get a good viewing distance, course conditions wipers are very play an important role. Because it's very important for you to know when to replace your windshield wipers that are already not worth to use.

The owner of the Orange Garage, Octa Bond, explained that the wiper is one component on the car that is durable, if cared for properly, of course. "To know the indications of damage usually with sounds," said Octa.

For any damage wiper, Octa says vehicle owner can pay attention to the performance. If the rubber is not able to sweep the water to the maximum then it is an indication of the wiper must be replaced.

While the motor wiper, Octa reveals, the damage can be known from the sound of the sound and movement of the wiper.

"If there is a problem in the motor there is the sound of the hand with the usual round of windshield wipers. If it is indeed different from the sound heard round the wiper. Most easily, when the wipers are on top and then the contact is turned off position wiper down but limp and not to the starting position, "he said.



Meanwhile, for damages on the switch, when they wiper can be turned on and is in the top position, then the contact is turned off, then the wiper will still hang.

"If the switch is broken, when turned on and the wipers above, the contact is turned off, he would instantly switch off position without silence. When it's an indication of this kind should immediately checked into the workshop, "said Octa.

Do not rub the spark plug with a wire brush or Sandpaper

Do not rub the spark plug with a wire brush or Sandpaper

Simply use the compressor wind and regular toothbrushes.

When repair vehicle, often the owner found the head of the spark plug is black, or known by the name term carbon fouling.

These conditions are caused by a buildup of carbon crust on the ends of the electrodes. In effect, a spark at the spark plug will be reduced or disappear altogether.

A spark plug condition faced with the carbon fouling that accumulates there are two ways, replace the spark plug with a new or clean it up, so that the performance of the spark plug can get back as before.

Clean the spark plug on the crust is generally carried out by rubbing with sandpaper or a wire brush. However, the way this was not recommended by the manufacturer of spark plugs NGK spark plug Indonesia PT.

Technical Support NGK Busi Indonesia, Diko Oktaviano, say, clean spark plugs good performed using wind pressure and brush smooth.

"My suggestion, most just clean the carbon fouling (black shit) in the spark plug use sprays of wind from the compressor and a regular toothbrush. Not a wire brush, and do not get wet, because it's already hit burn and then hit the water, corrosion, "he said could explain.

Rubbing with sandpaper or wire brush can change the surface of the spark plug, so that the flame of the fire did not comply with the standards already specified.

Car Wrecking Fastest

Car Wrecking

One of them, parking near the walls of old.

There are a number of things that are actually worth so car owners attention before selecting a parking space. Because wrong-wrong thus risk damaging your car.

Moreover, if you want to park your vehicle when rainfall is high and accompanied by high winds, often resulting in a falling tree or billboards collapsed and override the cherished car. Thus, strive not to own a vehicle in an arbitrary manner.

As reported by AstraWorld, Wednesday, April 19, 2017, there are five points a very risky parking location damaging cars. What's it?

1. Near the old wall
Generally the old walls are already fragile and easily collapse, especially if the other side of the heavy rain and strong winds. If not sure parked near the wall that was sturdy enough, better find another safer location.

2. Under billboards
Iron-frames that make up the potentially broken billboards and on a vehicle below it. So also with the construction that is not strong enough to withstand exposure to the wind can result in billboards collapsed and damaging vehicles parked or passing underneath. So, try not to park the car near the Billboard.

3. Near BTS Tower and transmitter
We don't know if the BTS Tower or the transmitter has a strong foundation to support the construction of high standing. Wind gusts can lead to the towers collapsed if the Foundation and its construction is not strong enough. Stay away from BTS Tower or the transmitter when you have to park the car.

4. open the hollow Parking Area
The location of the parking lot with the sunken land contours more easily flooded. In a flooded parking lot locations then the water in the area is concave will more and more deep that cars parked in the basins of the risky submerged.

5. Under the roof of the less sturdy
We may never find the public parking area is not well maintained. Although the roof but look is not solid, at times it can be collapsed and override the vehicle underneath. If parking in a location like this, we recommend that you avoid parking beneath it and look for a safer location.

Wiper Founded When The Car Is Parked, What are the benefits?

Wiper Founded When The Car Is Parked, What are the benefits?

Keep your age wearing rubber wiper.

View of the Middle car wiper standing when parked has become a common thing. But not a few who still do not know what its benefits. Though seem trivial, but this step is actually very useful, especially to keep the age of the wearing of rubber wiper.

It disclosed the Orange Garage workshop owners, Octa Bond. According to him, when the wiper founded while being parked can make rubber wiper was longer.

"Actually founded it if it's parked car long enough. It was influential on the rubber wiper, "he told.

Octa also explains when establishing the wiper when parked car can keep the softness and suppleness rubber wiper, so the brittle not quick.

"Indeed if it stuck to the glass of the car can make faster rubber brittle. To keep the rubber wiper long-lived and can function well founded wiper when saving a car, "he said.

In addition to establishing the wiper, the owner of the vehicle can also be resolved wiper with newspaper or paper in order not to come into contact with the glass. The reason, direct contact with the glass, either in hot or rainy condition will certainly affect the quality of the rubber wiper.

Know the difference Engine Flush, Degreaser and Conditioner

Know the difference Engine Flush, Degreaser and Conditioner

The three of them made specifically to clean the machine.

One of the cars that rarely cleaned i.e. engine compartment. Generally, the owner of just concentrating on the exterior and interior, because it's two parts are considered to affect the comfort and appearance of the car.

In fact, the engine room also need care, not easily corroded and broken parts. Offered from pages Daihatsu, Monday 17 April 2017, many ways that can be done to maintain the cleanliness of car engines, one of them with a special cleaner fluid.

With the use of this type of cleaning is right, the car's engine can continue to operate well in a long time. Unfortunately, at this time a great many types of cleaners made specifically for the engine room.

Well, so you cannot go wrong purchasing, it's good to know first the liquid cleaner car engine based on type and function.

1. Engine Conditioner
Solvent-based liquid in the form of foam or foam serves to clean the combustion chamber. Here's how: with a sprayed into the combustion chamber through the hole plugs (plugs removed). While cleaning, we recommend a temperature of machine in warm conditions, because the crust will be easier dissolved carbon.

2. Engine Degreaser
This fluid is also made from solvent, often only harder. That is because the task of this fluid is clean of dirt or scale the outside of the machine. The packaging is also the same with engine conditioners, namely aerosol in the tubes. The unique formulation of engine degreaser it will bind and dissolve the stubborn dirt. Spray the dirty in the section at the time of the engine is still warm, then rinse with water.

3. Engine Flush
Engine flush is a special detergent which is able to clean up the grime on the oil. Usage is by inserting fluid into the engine through the oil hole, and then turn on the machine for 15 minutes. After that, remove the liquid through the disposal of oil. With a strong cleanser, engine flush is also able to help clean up the carbon attached to the piston ring.